Simple SIP DECT configuration 151
DECT Access Points are identified by their Radio Part Number
(RPN). In the work space, the DECT manager shows the status
of the present DAPs. The RPN of a DAP is modified by editing
the RPN field.
In the DAP manager task area, choose one of the following
options.
• Reboot—Select this option to reboot a selected DAP.
• Reboot All—Select this option to reboot all DAPs in the list.
• Delete—Select this option to remove a DAP from the list.
The DAP takes a few minutes to reboot.
3 Confirm the DAP is active by checking the status of the device
under the Working column. Active DAPs have Yes in this
column.
--End--
Adding number range
To add a Number Range, complete the following procedure.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
