60 Site planning
Plug the basestation power cord connector into the upper right
edge of the battery.
--End--
Testing the deployment handset
Figure 38
Handset display and keypad details
Procedure 10
Testing the deployment tool handset
Step Action
1 Start the test and establish a link with the basestation.
Remove the handset from its charger.
2 Turn on the handset.
Press the shift key and press the ON/OFF button. DECT
HANDSET appears on the handset display.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
