Objet Eden500V - Safety Features

Safety
2–2 DOC-00500 Rev. F
Safety Features
Eden3‐DprintersaredesignedandmanufacturedtocomplywithCEand
FCCstandards.Theyareequippedwiththefollowingsafetyfeatures:
Coverlock Thecoverislockedwhiletheprinteris
working.Itisreleasedwhentheprinterreverts
topauseorstopmode.
WARNING:Donotdefeatthesafetylock.
Doingsocouldresultinseriouspersonal
injury.Ifthesafetylockdoesnotfunction
correctly,contactyourserviceprovider.
Coverinterlock
switch
TheinternalACpowersupply(totheUVlamp,
motionmotorsandthetrayheater)isturnedoff
whenthecoverisopened.
WARNING:Donotdefeattheinterlock
switch.Doingsocouldresultinserious
personalinjury.Iftheinterlockdoesnot
functioncorrectly,contactyourservice
provider.
UVscreen The
transparentsectionofthecoverblocks
harmfulUVradiation,allowingtheoperatorto
viewthemodelasitisbeingmade.
Circuitbreaker Themainpowersupplyisturnedoffbyan
internalswitch incaseofanelectrical
malfunction.
Groundedchassis Theframeandchassisoftheprinterare
groundedtoprevent
electricalshock.
If the Eden 3-D printing system is not used as specified in this guide, the
safety features may not provide adequate protection.