Objet Eden500V - Making Changes to a Job

Using Job Manager
6–10 DOC-00500 Rev. F
Making
changes to a
Job
Fromthejob(“print”)queueofJobManager,youcanopenjobstomake
changestothembeforeprinting.
To make changes to a job:
1. Selectthejobintheprintqueue.
2. ClicktheEditJobiconoropentheJobmenuandselect
Edit.
ObjetStudioopens,displayingthebuildtray.(Thestatusofthejobin
JobManagerchangesfrom“Waiting”to“Editing.”)
3. MakechangestothebuildtrayinObjetStudio(seechapter 5 , “Using
ObjetStudio”).
4. InObjetStudio,savethechangesbyselecting
File > Save Tray(orby
pressing
Ctrl+S).
5. CloseObjetStudio.
ThestatusofthejobinJobManagerchangesbackto“Waiting.”
Job>DeleteJob... Removestheselectedjobfromthequeue.
Job>ReviewJob… Opensawindowdisplayingtheselectedtray.
Inthiswindow,youcanviewthetrayfrom
differentangles.
Job>JobInfo… Opensawindowdisplayingthepropertiesof
theselectedmodel.
Job>EditJob… LaunchesObjetStudioandloads
theselected
tray,toenablemakingchangestoitbefore
beingprinted.(See“MakingchangestoaJob,”
below.)
Help>About... DisplaystheJobManagerversion.
Icon Menu Option Purpose