Objet Eden500V - Job Manager Operations

DOC-00500 Rev. F 6–9
Eden500V/350V/350 User Guide
Job Manager
Operations
Thefollowingtablesummarizesthemainoperationsavailablefromthe
serverJobManagerinterface.Manyoftheiconsareactiveonlyifajobis
selected.
Icon Menu Option Purpose
3‐DPrinter>
NewJob
LaunchesObjetStudioforpreparingnewtrays.
3‐DPrinter>
SetPrinter
Displaysanetwork‐browsingdialogbox,to
connecttoanObjetservercomputer.Tospecify
acomputer,itmustbeoperatingand
connectedtothelocalnetwork.
3‐DPrinter>
AddJob...
Enables
youtoloadpreviously‐savedjobs(otf
files).
3‐DPrinter>Report Displaysoptionsforusermessagesand alerts
(paperprinter,e‐mail,SMS—see“Configuring
UserAlerts”onpage 5).
——— Movestheselectedjobtotheheadoftheprint
queue.
——— Movesuptheselectedjobbyonestepinthe
printqueue.
Note:Itisrecommendedthatyougroup
togetherjobstobeprintedwiththesametype
ofmodelmaterial.Thisway,theneedfor
changingmodelmaterialbetweenjobsis
reduced.
——— Movesdowntheselectedjobbyonestepinthe
printqueue.
——— Movestheselectedjobtotheendofthe
print
queue.
Job>RestartJob Forastoppedjobintheprintqueue:Starts
printingtheselectedjobfromthebeginning.
ForaselectedjobintheHistorysection:Moves
thejobtotheprintqueueandchangesitsstatus
toWaiting.
Job>Stop... InstructstheEdenprintertostop
printingafter
curingthecurrentlyprintedslice.(Youcan
continueprintingwiththeResumeiconor
menuoption,butforshortinterruptions,use
thePauseiconormenuoption.)
Job>Pause... InstructstheEdenprintertostopprintingafter
curingthecurrentlyprintedslice.(This
commanddoesnotflushtheprinting
buffer.
Therefore,useitinsteadofStopwhenyou
intendtocontinueprintingthejobshortly.)
Job>Resume Continuesprintingthecurrentjobafter
printingwasstoppedwiththeStoporPause
iconormenuoption.