Objet Eden500V - Repositioning Objects

Using Objet Studio
5–12 DOC-00500 Rev. F
Other Z-axis options (in the Automatic Lay On section):
• When under the tray—Thedisplayofobjectsthatarebelowthebuild
trayisautomaticallychangedsothattheobjectisattraylevel.
• Never—Thedisplayofobjectsthatareaboveorbelowthebuildtrayis
notchanged.
Repositioning
Objects
Youcanselectandmanipulateobjectsonthebuildtrayafterselectingthe
followingiconsormenuoptions.
Afterusingtheserepositioningiconsonce,theyaredisabled,unlessyou
firstclickthe StickyModeicon .Afterclickingthisicon,therepositioning
iconusedremainsactiveuntilyouclicktheSticky
Modeiconagainto
releaseit.
Anotherwayofrepositioningobjectsonthebuildtrayisbyusingtheicons
ontheTransformtoolbarthatnudgetheselectedobjectindifferentways.
Viewing Object Properties
Afteryoumanuallymanipulateanobjectwiththemouse,itsnew
propertiesaredisplayedintheTransformtaboftheEntityPropertiesdialog
box.
Icon Menu
Option
Purpose What to do
(none) Forselectinganobject. Clicktheobjectonthebuildtray.
Object>
Translate
Forselectingandmoving
anobjectwiththemouse.
Clicktheobjecttoselectit.
Dragtheobjecttoa newlocation
whileholdingdownthemouse
button.
Object>
Rotate
Forselectingandrotating
anobjectontheZ‐axis.
Clicktheobjecttoselectit.
Holddowntheleftmousebutton
andmovethemouseleft/right.
Object>
Scale
Forselectingand
changingthesizean
object.
Clicktheobjecttoselectit.
Holddowntheleftmousebutton
andmovethemouseleft/right.
Clicktomovetheobject20mmalongtheX‐axis.
Clicktomovetheobject20mmalongtheY‐axis.
Clicktomovetheobject30degreesontheZ‐axis.
Clicktorotatetheobject30degreesontheX‐axis.
Clicktorotatetheobject30degreesonthe
Y‐axis.
Clicktorotatetheobject30degreesontheZ‐axis.
The Entity Properties dialog box is displayed by default (see figure 5-5 on
page 4) and whenever the screen layout is changed or refreshed (see
“Arranging the Objet Studio Screen” on page 6).