Objet Eden500V - Sending the Tray to the 3-D Printer for Production

Using Job Manager
6–12 DOC-00500 Rev. F
Figure 6-9: Insufficient material warning
Whenthetimesetinthedialogboxtriggerstheremotealertmessage,the
warningiconchangescolor—fromayellowtoaredbackground.
Sending the
Tray to the 3-D
printer for
Production
Ifthereisajobintheprintqueue,itissentautomaticallytotheEden
printer—aslongasitison,thereisaconnectiontotheprinter,andthe
printerisonline.Chapter7describesstartingandoperatingtheEden
printer.
Material
warning
icon