10 Fundamentals of working with the Keratograph
30 / 106 Instruction Manual Keratograph 5M (G/77000/XXXX/EN – Rev05)
10 Fundamentals of working with the Keratograph
The Instruction Manual concentrates on how to operate the
Keratograph 5M and describes
the measurement process and
loading previous examinations
For detailed information about measurement evaluations, please refer
to the User Guide.
10.1 Starting the Keratograph 5M Software
You have the following options for starting the Keratograph 5M soft-
ware:
Select a patient in the Patient Data Management view, and double-
click on an examination in the list of existing examinations.
or
Select a patient in the Patient Data Management view, and click the
[Keratograph] button.
or
Double-click the desired patient name.
10.2 Performing a Reference Measurement
Before the first measurement you need to perform a reference measure-
ment.
Select the menu item [Settings].
Choose [Reference Measure].
For how to perform a reference measurement see Chap. 21.5,
page 85.
To Next Page
Loading...
