20 Patient Data Management
80 / 106 Instruction Manual Keratograph 5M (G/77000/XXXX/EN – Rev05)
In the dialog that appears, select the folder to which the data
should be backed up.
Confirm your selection with [OK].
To back up the data, press the [Save] button. The previously select-
ed data will then be backed up to the corresponding folder.
20.4.2 Restoring Data
If a loss of data occurs, the data from a previous backup can be import-
ed again into the patient data management user interface.
Press the [...] button.
In the dialog that appears, select the folder which contains the
backup data.
Confirm your selection with [OK].
To import the data, press the [Restore] button. All data in the cor-
responding folder will be transferred to the patient data manage-
ment user interface.
20.4.3 Automatic Backup
Besides the manually executed backup, there is also the option to carry
out a backup when the patient data management user interface is
closed. The settings required for this can be made in the “Settings” area,
see User Guide.
To Next Page
Loading...
