OCULUS Keratograph 5M - Disinfection; Attaching Paper to the Chin Rest

21 Cleaning, disinfection and maintenance
84 / 106 Instruction Manual Keratograph 5M (G/77000/XXXX/EN – Rev05)
21.3 Disinfection
Attention
Risk of electric shock if the Keratograph 5M is not completely discon-
nected from the mains for these jobs.
 Turn the Keratograph 5M off, Chap. 8.2, page 25.
 Pull the power plug before cleaning. Take hold of the power plug
for this purpose; do not pull on the cable.
 Mikrozid sensitive wipes premium
Fa. Schülke & Mayr
Softpack 48 pcs
Art. no. 165711
Schülke & Mayr GmbH
Phone: +4940521000
Fax. +494052100318
E-Mail@schuelke.com
www.schuelke.com
Note
Equipment damage caused by disinfectant solution
The disinfectant solution may damage the finish if it is sprayed directly
on it.
 Spray the disinfectant solution onto a cleaning cloth, do not spray
it directly on the device.
 Disinfect the forehead rest after each examination, disinfect the
housing if necessary.
 If you do not use chin rest paper: Disinfect the chin rest after each
examination.
21.4 Attaching Paper to the Chin Rest
If you want to attach new chin rest paper, follow these instructions:
 Pull the two pins out of the chin rest.
 Place the chin rest paper in such a way that the holes of the paper
and those in the chin rest are aligned.
 Insert the two pins in the chin rest.
Fig. 21-2: Fasten chin rest paper
1
3
2
1 Pins
2 Paper for chin support
3 Chin rest