20 Patient Data Management
Instruction Manual Keratograph 5M (G/77000/XXXX/EN – Rev05) 77 / 106
The default options for import and export of data are configured in the
“Settings” field, see also the User Guide.
Depending on the settings, you may not have to perform all of the fol-
lowing steps (e.g. selection of the directory).
Select the “Target” where you would like to export the data.
Recommendation: Export the patient data using the “Single file (U12)”
option.
Press the [...] button.
In the dialog that appears, select the folder or the file to which the
patient data should be exported.
Confirm your selection with [OK] or [Open].
To export the data, press the [Export] button.
20.3 Import Patient Data
If you receive patient data, for example, on a USB stick, you can import
these data.
Note
Risk of loss of data due to computer viruses
Computer viruses can cause loss of data.
Run a virus check before importing data from the USB flash drive.
To Next Page
Loading...
