OCULUS Keratograph 5M - Filling in the Recommendation Field; Using Text Blocks; Entering Own Texts; Deleting Texts

18 Performing Dry Eye Examinations: JENVIS Dry Eye Report
64 / 106 Instruction Manual Keratograph 5M (G/77000/XXXX/EN – Rev05)
 If measurement was correct: Click on the [Back to report] button to
return to the overview display.
After performing a redness examination, the image of the eye is
shown in the overview display.
 If measurement has to be repeated: Press the [Repeat examination]
button.
Recommendation:
 Always perform all given examinations to receive a complete hexa-
gram.
 Fill in the “Recommendation” field so that the patient receives the
respective information, Fig. 18.3, page 64.
For further information on the JENVIS Dry Eye Report and the examina-
tions, refer to the User Guide.
18.3 Filling in the “Recommendation” field
In this field you can insert details which are later shown on the printout.
You can use text components.
For more information, refer to the User Guide.
18.3.1 Using Text Blocks
 Click the [Text blocks] button.
 Select the desired text component. This text will be added to the
“Recommendation” field.
 Select further text components, if required.
18.3.2 Entering own Texts
 Move the cursor to the “Recommendation” field and enter your
own text.
18.3.3 Deleting Texts
 Mark the text which should be deleted with the cursor.
 Press “Del” on the keyboard.
The text will be deleted permanently.
18.4 Printing the JENVIS Dry Eye Report
 Select the [Print] menu item.
The print dialog opens.
Select the desired printer.
 Press the [Print] button.
The results of the dry eye examinations will be printed in the JENVIS
Dry Eye Report.
After printing, the JENVIS Dry Eye Report is in read-only mode.
For more detailed information on the printout, refer to the User Guide.