OCULUS Keratograph 5M - Recording a Fluo Image

17 Imaging
56 / 106 Instruction Manual Keratograph 5M (G/77000/XXXX/EN – Rev05)
17.1 Recording a Fluo Image
 Activate the [Fluo Imaging] radio button.
 Adjust the camera if necessary, Chap. 17.5, page 59.
 Align the camera to the center of the contact lens.
 Press the [Image] button for a static image.
Now you can use the fluo image for contact lens fitting, see User
Guide.
 Press the [REC] button to record a video, for example, to dynami-
cally check the fit of the contact lens.
Click the [STOP] button to stop or pause the recording.
You can use the foot switch alternatively, (Chap. 10.10, page 36).
The video recordings and single images are saved automatically.
 Press the [Close] button and you will reach the overview display.
You can find more information in the User Guide.
Fig. 17-2: “Fluo imaging” function