Oki B6200 - FIP-1.P3 Solid Black

1 - 86
Chapter 1 Troubleshooting
FIP-1.P3 Solid black
Trouble substance
The entire paper is printed jet-black.
ESS and possible causative parts
- EP CARTRIDGE
- HVPS/MCU (PL12.1.19)
- LVPS (PL12.1.5)
- 150 FEEDER ASSY (PL5.1.1)
- ROS ASSY (PL8.1.1)
- PWBA ESS (PL12.1.13)
- 250 FEEDER ASSY (PL6.1.11)
- 550 FEEDER ASSY (PL7.1.10)
Before commencing troubleshooting, check the paper transfer course. Make sure there is no foreign
articles on the transfer course, such as staples, paper clips, scraps of paper and so on.
Step Check Yes No
1
Checking EP CARTRIDGE
Install a new EP CARTRIDGE.
Carry out a test printing.
Is the print normal?
End of work Go to step 2.
2
Checking HVPS/MCU
Cover entire ROS ASSY window.
Carry out a test printing.
Is the print black?
Go to FIP2.18
HVPS/MCU.
Go to step 3.
3
Checking ROS ASSY
Cover a half of ROS ASSY window.
Carry out a test printing.
Is the print half white and half black?
Is the print black?
Go to FIP2.3 ROS
ASSY.
Replace
HVPS/MCU.
(RRP12.10)