Oki B6200 User Manual

xi
5.5 Installation Procedures
5.5.1 Installing laser printer
For details, refer to the Instruction Manual supplied with the main unit.
When holding up the laser printer, be sure to grasp the handles with both hands.
Grasping a part other than the handles may result in fall or damage of the laser printer.
When holding up the laser printer, bend your knees thoroughly to prevent lower back
strain.
The protection sheets and the fixing materials, which are removed before the installation,
are re-used when the laser printer is moved to another place. Be sure to keep them.
1) Unpack the laser printer, and place it in an installation location after removing cushioning materials.
2) Confirm the attachments.
3) Peel off fixing tapes applied to the later printer.
4) Unpack the EP CARTRIDGE, then be sure to shake it seven to eight times holding both sides.
When removing the toner seal, draw it out straight and horizontally. After the
removal, be careful not to shake or give a shock to the EP CARTRIDGE.
5) Open the COVER OPEN, and install the EP CARTRIDGE.
6) Close the COVER OPEN.
7) Draw the paper tray, and press down the PLATE ASSY BTM to lock.
8) Place papers into the paper tray.
When placing papers into the paper tray, be careful for the followings:
- Align four corners of papers to place.
- Adjust the paper guide to the paper size.
- Do not place papers over the capacity or over the upper-limit line of the paper
tray.
9) Push the paper tray into the laser printer to install.
10) Connect the power cord.
11) Turn on the power switch of the laser printer.
12) Try some test printings with each paper-feed trays to confirm that there is no problem.
5.5.2 Installing Option Face Up Tray
For details, refer to the Instruction Manual supplied with the main unit.
Before the installation, turn off the power and plug off the power cord.
1) Unpack the Option Face Up Tray, remove cushioning materials, and confirm the attachments.
2) Insert the front edge of the Option Face Up Tray into the slot on the upper-rear of the laser printer to
install.
3) Connect the power cord.
4) Turn on the power switch of the laser printer.
5) Try some test printings to eject onto the Option Face Up Tray and confirm that there is no problem.

Oki B6200 Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	10.2 s
Print speed (black, normal quality, A4/US Letter)	24 ppm
Internal memory	128 MB
Processor model	PowerPC
Maximum internal memory	640 MB
Sound power level (standby)	50.3 dB
Total input capacity	400 sheets
Total output capacity	500 sheets
Maximum print size	210 x 297 mm
Media weight (tray 1)	60 - 216 gsm
Paper tray media types	Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power requirements	230VAC +/-10%, 50/60Hz +/-2%
Compatible operating systems	Windows 98, 98SE, ME, NT4.0, 2000, XP
Maximum duty cycle	75000 pages per month
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	15 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	422 x 455 x 324 mm