1 - 42
Chapter 1 Troubleshooting
FIP1.15 Low Paper in Tray/Tray 2
Step
Check Yes No
Possible causative parts:
SENSOR LOW PAPER (PL6.1.4, PL7.1.4)
ACTUATOR LOW PAPER (PL6.1.5, PL7.1.5)
PLATE ASSY BTM (PL3.1.10, PL4.1.10)
HVPS/MCU (PL12.1.19)
250 FEEDER ASSY (PL6.1.11)
250 PAPER CASSETTE (PL3.1.50)
550 PAPER CASSETTE (PL4.1.50)
550 FEEDER ASSY (PL7.1.10)
1
Checking the sensor for operation
Does Error still occur, after Paper Cassette filled with a
specified amount of paper is inserted into Tray 2?
Go to step 2. End of work
2
Checking ACTUATOR LOW PAPER for function
Remove Paper Cassette.
Does ACTUATOR LOW PAPER move smoothly, when
moving ACTUATOR LOW PAPER up and down with a
finger?
Does ACTUATOR LOW PAPER go into the sensor part of
SENSOR LOW PAPER, when the flag is pushed up?
Does ACTUATOR LOW PAPER go out of the sensor part
of SENSOR LOW PAPER, when the flag is released?
Go to step 3.
Replace
ACTUATOR LOW
PAPER.
3
Checking PLATE ASSY BTM for operation
Does PLATE ASSY BTM move ACTUATOR LOW PAPER
normally, when PLATE ASSY BTM is pushed or released?
Go to FIP2.7
SENSOR LOW
PAPER.
Replace PLATE
ASSY BTM.
(RRP3.5, 4.5)
To Next Page
Loading...
