8 - 11
Chapter 8 Printer Specifications
4. Functions
4.1 Recording System
Electrophotography (roller charging, magnetic monocomponent toner development)
4.2 Exposure System
Semiconductor laser beam scanning
4.3 Transfer System
Roller transfer system
4.4 Fixing System
Thermal fixing using a heat roller
4.5 Resolution
♦ 34PPM
Switched between 600 dpi and 1200 dpi by a video signal from the controller.
♦ 24PPM
• 600dpi
• Switched between 600 dpi and 1200 dpi by a video signal from the controller.*1
*1 Factory Option
Reference: "dpi" is an abbreviation of "dots per inch".
4.6 Warm-Up Time
Time until printing is made possible after the power is turned ON.
♦ 34PPM
Within 17 seconds (Environment temperature: 22°C; Rated voltages: when nominal voltages of
100 V, 120 V, and 220 V are applied)
♦ 24PPM
Within 13 seconds (Environment temperature: 22°C; Rated voltages: when nominal voltages of
100 V, 120 V, and 220 V are applied)
To Next Page
Loading...
