Oki B6200 - Fip2.15 Clutch Regi (Pl5.1.23)

1 - 71
Chapter 1 Troubleshooting
FIP2.15 CLUTCH REGI (PL5.1.23)
Step
Check Yes No
Possible causative parts:
CLUTCH REGI (PL5.1.23)
HARNESS ASSY CHUTE (PL12.1.17)
HARNESS ASSY TRAY1 (PL5.1.37)
HVPS/MCU (PL12.1.19)
LVPS (PL12.1.5)
1
Checking HARNESS ASSY CHUTE for continuity
Disconnect P/J24 from HVPS/MCU.
Are the following continuous normally?
J24-14 <=> J245-5
J24-15 <=> J245-4
Go to step 2.
Replace
HARNESS ASSY
CHUTE.
2
Checking HARNESS ASSY TRAY1 for continuity
Remove CLUTCH REGI.
Disconnect P/J245.
Are the following continuous normally?
P/J245-9 <=> P/J243-2
P/J245-10 <=> P/J243-1
Go to step 3.
Replace
HARNESS ASSY
TRAY1.
3
Checking the resistance of CLUTCH REGI
Is the resistance of the wirewound resistor between
P/J243-1 <=> P/J243-2 of CLUTCH REGI, 172 ohm +/-
10% (at 20 °C)?
Go to step 4.
Replace CLUTCH
REGI. (RRP5.6)
4
Checking HVPS/MCU for continuity
Disconnect P/J24 and P/J10 from HVPS/MCU.
Is J24-14 <=> J10-1 continuous normally?
Go to FIP2.1
LVPS.
Replace
HVPS/MCU.
(RRP12.10)