2 - 30
Chapter 2 Operation of Diagnostic
2. Service Data
2.1 DC330 Input Component Check List
001-100
SENSOR/SWITCH CHECK
[Indication] H/L
[Description]
The number of sensor check counts. This is not for a particular sensor. Whichever sensor is
checked, it is counted.
2.2 DC330 Output Component Check List
008-001
MAIN MOTOR
[Description]
Drives the main motor.
008-002
EXIT MOTOR, CW, NORMAL SPEED
[Description]
Drives the Exit Motor at a normal speed.
008-003
EXIT MOTOR, CCW, HIGH SPEED
[Description]
Drives the Exit Motor at a double speed in a reverse direction.
008-004
EXIT MOTOR, CCW, NORMAL SPEED
[Description]
Drives the Exit Motor at a normal speed in a reverse direction.
008-005
DUPLEX MOTOR, CW, HIGH SPEED
[Description]
Drives the Duplex Motor at a double speed.
008-006
DUPLEX MOTOR, CW, NORMAL SPEED
[Description]
Drives the Duplex Motor at a normal speed.
008-007
Tray1 FEEDER CLUTCH
[Description]
Turns on the Tray1 Feed Clutch which supplies a driving force to the Feed Roll that carries
papers from the Tray1.
008-008
Tray2 FEEDER CLUTCH
[Description]
Turns on the Tray2 Feed Clutch which supplies a driving force to the Feed Roll that carries
papers from the Tray2.