xii
6. Disassembly
6.1 Disassembly procedures
6.1.1 Disassembling laser printer and option units
For details, refer to the Instruction Manual or Chapter 3 Removal and Replacement Procedures.
Perform the disassembly in the reverse procedures of the installation.
When holding up the later printer, be sure to grasp the handles with both hands.
Grasping a part other than the handles results in fall or damage of the laser printer.
When holding up the later printer, bent your knees thoroughly to prevent the lower
back strain.
Be sure to remove the EP CARTRIDGE from the laser printer and put it into a
plastic bag to dismantle.
Be sure to re-use the protection sheets and fixing materials, which are removed at
the installation.
Confirm that no attachment is lacked.
Be sure to use the cushioning materials properly.
To Next Page
Loading...
