8 - 22
Chapter 8 Printer Specifications
7. Use Environment
7.1 Installation Temperature/Humidity
During operation: 5 to 35°C / 15 to 85%RH
(At 35°C, 70%RH is the upper limit. At 85%RH, 32°C is the upper limit. No
dewing.)
During non-operation: -20 to 40°C / 5 to 85%RH (no dewing)
The environment where the image quality is guaranteed is different from the above-
described environment.
7.2 Installation Height
0 to 3,500 m
7.3 Installation Horizontality
The machine must be installed horizontally at a tilt within 5°.
7.4 Installation Surrounding Light
Less than 3000 Lux (no direct sunshine)
7.5 Generated Noise
♦ 34PPM
During operation: less than 6.62 B (A)
*
less than 7.30 B (A)
*
(when options are fully installed)
During standby: less than 4.00 B (A)
*
♦ 24PPM
During operation: less than 6.30 B (A)
*
less than 6.80 B (A)
*
(when options are fully installed)
During standby: less than 4.00 B (A)
*
*
Except for impulsive sound
Full Option = Machine + Option 550 Paper Feeder (two stages) +Duplex + OCT
To Next Page
Loading...
