6 - 6
Chapter 6 Principle of Operation
3. Driving Force Transmission Path
3.1 MAIN MOTOR
The rotating force of the MAIN MOTOR is transmitted via gears in the GEAR ASSY HOUSING and via
the GEAR ASSY PLATE to components that need mechanical driving force as shown in the following
flow.
The driving force transmitted to the EP CARTRIDGE drives the Drum, and is transmitted to the BTR
ASSY through the Drum Gear.
The driving force transmitted to the 550 FEEDER ASSY drives the ROLL ASSY NUDGER and ROLL
ASSY FEED.
The driving force transmitted to the 150 FEEDER ASSY drives the ROLL REGI METAL and ROLL
REGI RUBBER, as well as the ROLL ASSY NUDGER and ROLL ASSY FEED.
The driving force transmitted to the FUSER ASSY drives the Heat Roll.
3.2 MOTOR ASSY EXIT
The rotating force of the MOTOR ASSY EXIT is transmitted via various gears to components that need
mechanical driving force as shown in the following flow.
To Next Page
Loading...
