8 - 10
Chapter 8 Printer Specifications
3.6 Dimensions/Mass of EP CARTRIDGE
The dimensions are specified under the same posture as installed in the machine. Partial protrusions
are not included.
Width (W): 298.5 mm
Depth (D): 177.4 mm
Height (H): 159.0 mm
Mass: 1.70 kg
*1
/ 1.96 kg
*2
*1: 10,000-sheet EP CARTRIDGE (packed in the body)
*2: 17,000-sheet EP CARTRIDGE
Reference: Average number of prints at Letter size
and 5% black ratio
3.7 Installation Space (Minimum Installation Space)
The minimum space required to install the machine for normal use is as follows (excluding the space
occupied by the operator).
• In the height direction, 400 mm must be secured from the top surface of the machine.
JG8006AA
W
D
H
200 mm
300 mm
930 mm
JG8103AA
12 mm
1110 mm
255 mm
10 mm
402 mm
To Next Page
Loading...
