Oki B6200 - FIP1.45 Full Stack Error;500 Paper Exit

1 - 52
Chapter 1 Troubleshooting
FIP1.45 Full Stack Error/500 Paper Exit
Step
Check Yes No
Possible causative parts:
SENSOR FULL STACK (PL10.1.26)
ACTUATOR FULL STACK (PL10.1.10)
HVPS/MCU (PL12.1.19)
1
Checking ACTUATOR FULL STACK for operation
Does ACTUATOR FULL STACK in paper feed out section
move smoothly?
With tool
Go to step 2.
Without tool
Go to step3.
Replace
ACTUATOR
FULL STACK.
2
Checking SENSOR FULL STACK for operation (1)
Remove EP CARTRIDGE.
Does the number of Sensor/Switch Check increase by
one, every time pushing and releasing ACTUATOR FULL
STACK?
Checks by Chapter 2 Diagnostic [Sensor/Switch Check].
Go to step 3.
Go to FIP2.46
SENSOR FULL
STACK.
3
Checking SENSOR FULL STACK for operation (2)
Replace SENSOR FULL STACK.
Does the problem still occur, after replacing SENSOR
FULL STACK?
Replace
HVPS/MCU.
(RRP12.10)
End of work