1 - 101
Chapter 1 Troubleshooting
5
Checking Heat Roll and Pressure Roll
Remove FUSER ASSY. (RRP8.8)
Warning; Start the operation after the FUSER ASSY
have cooled down.
Turn the Gear HR with a finger, and check the Heat Roll
and Pressure Roll.
Are the Heat Roll and Pressure Roll damaged or stained?
Go to step 6.
Replace FUSER
ASSY.
(RRP8.8)
6
Checking EP CARTRIDGE
Install a new EP CARTRIDGE.
Carry out a test printing.
Is the paper still damaged?
Go to step [ESS
and possible
causative parts].
End of work
Step
Check Yes No
To Next Page
Loading...
