2 - 32
Chapter 2 Operation of Diagnostic
009-002
CHARGE ROLL AC
[Description]
Applies an AC voltage to the Bias Charge Roll (BCR).
009-003
CHARGE ROLL DC
[Description]
Applies a DC voltage to the Bias Charge Roll (BCR).
009-004
DEVELOPER BIAS AC
[Description]
Applies an AC voltage to the Developer Magnetic Roll.
009-005
DEVELOPER BIAS DC
[Description]
Applies a DC voltage to the Developer Magnetic Roll.
009-006
TRANSFER ROLL -
[Description]
Applies a DC negative voltage to the Transfer Roll.
009-007
TRANSFER ROLL +
[Description]
Applies a DC positive voltage to the Transfer Roll.
009-008
DETACK SAW
[Description]
Applies a voltage to the Detack Saw.
009-009
ROS MOTOR
[Description]
Drives the polygon motor in ROS.
009-010
LASER DIODE
[Description]
Checks that the laser diode emits light.
009-011
PRESSURE ROLL DC BIAS +
[Description]
Applies a DC positive voltage to the Pressure Roll.
010-001
FAN MOTOR STOP
[Description]
Checks that the fan stops.
010-002
FAN MOTOR, HIGH SPEED
[Description]
Drives the fan in a high-speed rotation mode.
To Next Page
Loading...
