3 – 75
Chapter 3 Removal and Replacement Procedures (RRPs)
After installing, make sure that the 3 claws of the GUIDE ASSY SD R250 sit
correctly in the grooves of the HOUSING TOP 250.(NOTE3).
5) While pressing down the hook of the HOUSING TOP 250, install the GUIDE ASSY SD L250
(PL3.1.11) to the HOUSING TOP 250.
After installing, make sure that the 3 claws of the GUIDE ASSY SD L250 sit
correctly in the grooves of the HOUSING TOP 250.
6) Push the PLATE ASSY BTM downward to lock.
7) Install the GEAR PINION (PL3.1.12) to the HOUSING TOP 250 (PL3.1.16).
When installing the GEAR PINION, make sure the GUIDE ASSY SD R250 and GUIDE
ASSY SD L250 are completely opened. If not, the side register may be misaligned.
8) Install the COVER CST (PL3.1.1) to the 250 PAPER CASSETTE.
To Next Page
Loading...
