Oki B6200 - Page 245

3 – 81
Chapter 3 Removal and Replacement Procedures (RRPs)
Removal
1) Remove the COVER CST (PL3.1.1) from the 250 PAPER CASSETTE.
2) Remove the 2 screws on the back side of the HANDLE EXTENSION 250 (PL3.1.33).
3) Rrelease the 5 hooks at the upper side and the 2 hooks at the lower side of the HANDLE EXTEN-
SION 250 (PL3.1.33), then, remove the HANDLE EXTENSION 250 (PL3.1.33) from the HOUSING
EXTENSION 250 (PL3.1.34).
Replacement
1) Put the 5 hooks on the upper side and 2 hooks on the lower side of the HANDLE EXTENSION 250
(PL3.1.33) to the HOUSING EXTENSION 250 (PL3.1.34).
2) Secure the HANDLE EXTENSION 250 (PL3.1.33) to the HANDLE EXTENSION 250 (PL3.1.34)
using the 2 screws.
3) Install the COVER CST (PL3.1.1) to the 250 PAPER CASSETTE.