3 – 115
Chapter 3 Removal and Replacement Procedures (RRPs)
Removal
1) Remove the COVER CST (PL4.1.1) from the 550 PAPER CASSETTE.
2) Remove the HANDLE EXTENSION 550 (PL4.1.41). (RRP4.7)
3) Turn the LOW INDICATOR (PL4.1.37) by 90 degrees, and remove it together with the LOW IND
FRONT from the HANDLE EXTENSION 550.
4) Release the hook on the one side of the LOW IND FRONT, and remove the LOW IND FRONT
from the LOW INDICATOR.
Replacement
1) Install the LOW IND FRONT to the LOW INDICATOR (PL4.1.37).
When installing the LOW IND FRONT to the LOW INDICATOR, be careful in the
installing direction of the LOW IND FRONT.
2) Turn the LOW INDICATOR by 90 degrees in the opposite direction of the arrow, and install it
together with the LOW IND FRONT to the HANDLE EXTENSION 550.
3) Install the HANDLE EXTENSION 550 (PL4.1.41). (RRP4.7)
4) Install the COVER CST (PL4.1.1) to the 550 PAPER CASSETTE.
After assembling, make sure that the LOW IND FRONT moves up-and-down in
conjunction with the up-and-down movement of the PLATE ASSY BTM
To Next Page
Loading...
