Oki B6200 - Page 33

1 - 17
Chapter 1 Troubleshooting
116 340 Out of Memory
Lack of memory.
When it is not recovered by powering OFF and On, execute the
followings.
Add memory.
Remove PostScript (extension ROM).
116 348 S/W Fail
The internal process error is caused in ESS PWB.
When it is not recovered by powering OFF and On, replace ESS PWB
116 349 Function Call Error
The internal process error is caused in ESS PWB.
When it is not recovered by powering OFF and On, replace ESS PWB
116 350 AppleTalk S/W Fail
The serious error of AppleTalk is caused.
An error is caused when processing the software in ESS PWB, and the
process cannot be continued after that.
Replace ESS PWB.
116 351 EtherTalk S/W Fail
The serious error of EtherTalk is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 352 NetWare S/W Fail
The serious error of NetWare is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 353 lpd S/W Fail
The serious error of lpd is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 355 SNMP Agent S/W Fail
The serious error of SNMP Agent is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 356 EWS S/W Fail
The serious error of EWS is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 357 PS Fatal System S/W Fail
The serious error of PS Fatal System is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 358 Salutation S/W Fail
The serious error of Salutation is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 359 PLW S/W Fail
The serious error of PLW is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 360 SMB S/W Fail
The serious error of SMB is caused.
An error is caused when processing the software, and the process
cannot be continued after that.
Replace ESS PWB.
116 361 Spool HD Fatal Error
When accessing HDD, the serious error of HDD is caused.
Powering OFF and ON, and if the trouble is not recovered yet, execute
the followings.
Execute the HDD defect test of DC355 Hard Disk Program.
If it cannot resolve the trouble, replace HDD.
When it is not recovered yet, Replace ESS PWB.
116 362 SSDP Software Fail
An error is caused when processing the software in ESS PWB, and the
process cannot be continued after that.
Replace ESS PWB.
Chain Link Fault Items Conditions of detect/Methods of treatment Ref FIP