Oki B6200 - Page 463

3 – 299
Chapter 3 Removal and Replacement Procedures (RRPs)
Removal
1) Remove the COVER REAR 500 (PL10.2.21). (RRP10.9)
2) Remove the 5 screws (gold tapping, 6mm) securing the CHUTE LOW FU (PL10.2.7) to the
COVER REAR 550.
3) Release the hooks of the COVER REAR 550, and remove the CHUTE LOW FU from the COVER
REAR 550.
4) Remove the 2 screws (gold tapping, 6mm) securing the CHUTE UP FU (PL10.2.2).
5) Insert a screwdriver between ROLL PINCH FU (PL10.2.3) and CHUTE UP FU (PL10.2.2), and
remove ROLL PINCH FU (PL10.2.3).
6) Remove the SPRING PINCH FU (PL10.2.4).
Replacement
1) Install the SPRING PINCH FU (PL10.2.4).
2) Install the ROLL PINCH FU (PL10.2.3).
3) Install the CHUTE UP FU (PL10.2.2) to the CHUTE LOW FU(PL10.2.7) using the 4 screws (gold
tapping, 6mm).
4) Install the CHUTE LOW FU to the COVER REAR 550, and secure it with the hook.
5) Secure the CHUTE LOW FU to the COVER REAR 550 using the 5 screws (gold tapping, 6mm).
6) Install the COVER REAR 500 (PL10.2.21). (RRP10.9)