Oki B6200 - Page 528

3 – 364
Chapter 3 Removal and Replacement Procedures (RRPs)
Removal
1) Remove the COVER RIGHT (PL1.1.4). (RRP1.2)
2) Remove the SHIELD ASSY WINDOW (PL12.1.15). (RRP12.8)
3) Remove the SHIELD ASSY ESS (PL12.1.14). (RRP12.7)
4) Disconnect the harness connector from the connector (P/J310) of the PWBA ESS (PL12.1.13).
5) Remove the 4 screws (silver, 6mm) securing the BRACKET-PWBA HDD (PL12.1.32) to the frame.
6) Remove the BRACKET-PWBA HDD (PL12.1.32).
Replacement
1) Install the BRACKET-PWBA HDD (PL12.1.32) to the frame using the 4 screws (silver, 6mm).
2) Connect the connector of the harness to the connector (P/J310) of the PWBA ESS (PL12.1.13).
3) Install the SHIELD ASSY ESS (PL12.1.14). (RRP12.7)
4) Install the SHIELD ASSY WINDOW (PL12.1.5). (RRP12.8)
5) Install the COVER RIGHT (PL1.1.4). (RRP1.2)