3 – 368
Chapter 3 Removal and Replacement Procedures (RRPs)
Removal
1) Remove the COVER RIGHT (PL1.1.4). (RRP1.2)
2) Remove the SHIELD ASSY ESS (PL12.1.14). (RRP12.8)
3) Remove the SHIELD ASSY WINDOW (PL12.1.15). (RRP12.7)
4) Disconnect the harness connector from the connector (P/J310) of the PWBA ESS (PL12.1.13).
5) Remove the 2 screws securing the BRACKET ASSY-FLASH (PL12.1.33) to the frame.
6) Remove the BRACKET ASSY-FLASH (PL12.1.33).
Replacement
1) Install the BRACKET ASSY-FLASH (PL12.1.33) to the frame using the 2 screws.
2) Connect the connector of the harness to the connector (P/J310) of the PWBA ESS (PL12.1.13).
3) Install the SHIELD ASSY WINDOW (PL12.1.15). (RRP12.7)
4) Install the SHIELD ASSY ESS (12.1.14). (RRP12.8)
5) Install the COVER RIGHT (PL1.1.4). (RRP1.2)
To Next Page
Loading...
