Oki B721 - Consumable Counter Display

Oki Data CONFIDENTIAL
45487001TH Rev.1
4-30 /
4. Maintenance menus
4.3.2.6 Consumable counter display
The consumable counter display is used for viewing the usage of consumables.
1. Enter the self-diagnostic mode and, until CONSUMABLE STATUS appears,
press the MENU
or MENU button (the MENU button displays the next test
option and the MENU
button displays the preceding test option). Then press
the ENTER button.
2. Pressing the MENU
or MENU
button displays the usage of each consumable
(pressing the ONLINE or CANCEL button is disabled).
3. Press the BACK button to end the option (the state in step 1 is restored).
Upper Display Lower Display Format Unit Detail
K-ID UNIT ******** IMAGES DEC Images Displays the number of turns
performed by image drum unit
from the first-time installation of it
until present,
*1
K-ID USED ******** % DEC % Displays the usage of ID.
FUSER UNIT ******** PRINTS DEC Prints Displays the number of prints
made from the first-time
installation of a fuser unit until
present *2
K-TONER
(FULL)
******** % DEC % Displays the usage of toner.
K-STC MODE
CNT
******** *8192 DEC DOT Displays of the printing dot count
numbers of toner.
K OVER RIDE
CNT
******** TIMES DEC Times Displays the extension life
counter value of a toner
cartridge.
*1 One third of the number of drum turns inA4 (A4 portrait) three-pages-per-job printing is
regarded as one count.
*2 Based on the paper length of Legal 13, if the sheet is the legal 13 length or less, it is regarded
as one count, and if the sheet length exceeds the Legal 13 length, the number of counts
is determined by how many times as large is the Legal 13 length as that of the sheet. (the
decimal is rounded out.)