Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL
45487001TH Rev.1
4-5 /
4. Maintenance menus
4.3 User maintenance menu functions
4.3.1 Maintenance menu (for end-users)
Some general menu categories on the operator panel of the printer serve as maintenance
menus (but are not system maintenance menus).
The options available in the menus are as follows:
Default setting in shade area
Item Settings Functions
Menus System
Adjust
Power Save Time 1 minute
2 minutes
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Sets time to wait for moving to Power Save
mode.
Moves to Power Save mode even during
an error.
Sleep Time
1 minute
2 minutes
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Sets the time to switch from Power Save
mode to Sleep mode.
The start point is the moment when the
printer goes into PowerSave.
The printer will not enter sleep mode at
the following conditions.
•
Parallel is enabled.
•
Network is working on 1000Base-T Full/
Half speed.
•
Error occurs.
Auto Power Off Time
1 hour
2 hours
3 hours
4 hours
8 hours
12 hours
18 hours
24 hours
Set the time to switch from Idle state to Off
mode.
Clearable Warning
Online
Job
Sets display deletion timing of clearable
warnings.
PS: JOB only
Item Settings Functions
Menus System
Adjust
Auto Continue On
Off
Sets whether a printer is automatically
recovered or not when memory overflow/
tray request occurs.
(Wait time for recovery: 15 sec)
Manual Timeout
Off
30 seconds
60 seconds
Sets time to wait for paper to be fed in
manual feed.
If paper is not fed within this period of
time, the job is canceled.
Timeout Injob
Off
5 seconds
10 seconds
20 seconds
30 seconds
40 seconds
50 seconds
60 seconds
90 seconds
120 seconds
150 seconds
180 seconds
210 seconds
240 seconds
270 seconds
300 seconds
Sets time between stopping reception of
job data and performing force printing.
Does not perform printing and cancels that
job instead in the case of PS.
Timeout Local
0 seconds
5 seconds
~
40 seconds
~
290 seconds
295 seconds
300 seconds
Time of open of each port after end of
job(The network is excluded. )
Time of the port open indicates the time
that open the current port which receiving
the current job and so other port be able
to receive data.
It increase /decreases in the step of 5

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard