Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL
45487001TH Rev.1
4-38 /
4. Maintenance menus
4.5 Manual density adjustment setting
C811/C822/C831/C841 is shipped with the auto density adjustment mode enabled. When the
mode is disabled by a user, the printer may print density out of adjustment while being used.
Manually perform density adjustment setting when the printer prints an improper density.
Note! The setting must be performed with the printer in a static state. Do not perform
it while the printer warms up.
(1) Press the MENU
or MENU button more than one time. Press the ENTER
button when Calibration appears.
(2) Press the MENU
or MENU button to select Adjust Density Execute. Press the
ENTER button.
(3) Press the ENTER button.
Auto density adjustment starts, the operator panel display providing a message
stating that density is being adjusted.

Oki B721 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Processor	533 MHz
Memory	256 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard