Oki B721

Oki Data CONFIDENTIAL
45487001TH Rev.1
4-4 /
4. Maintenance menus
Item Adjustment
Section in
Maintenance
Utility Operation
manual
Operation from
operator panel
(section in this
maintenance manual)
10 Send to file Transmits a specified file. Section
2.4.1.2.13
Unavailable
11 PU Log
File Save
function
Stores PU log flies. Section
2.4.2.2.16
Unavailable
12 Counter/
Toner
information
Checks the current consumable
counter values.
Section
2.4.1.3.1
Section 6.3.2.8
13 Menu
setting
values
Displays the menu settings set on the
printer (CU).
Section
2.4.1.3.2
Print a configuration
report (Menu Map)
(refer to User’s
Manual).
14 Printer
information
Checks the Mac address and each
firmware version.
Section
2.4.1.3.3
Print a configuration
report (Menu Map)
(refer to User’s
Manual).
15 Memory
information
Checks the information on the CPU
and memory installed on the printer
(CU).
Section
2.4.1.3.4
Print a configuration
report (Menu Map)
(refer to User’s
Manual).
16 Test print Executes the local print function and
sends a specified file.
Purpose: To check the printer on
a stand-alone basis and send a
download file.
Section
2.4.1.4.1
Perform local printing
(refer to System
Specification
17 Save local
print data
Stores files of local print data Section
2.4.1.4.2
Unavailable
18 Switch
scan test
Executes the switch scan test.
Purpose: To check each sensor for
proper operation.
Section
2.4.1.5.1
Section 6.3.2.3
19 Motor and
Clutch
Tests
Executes the motor clutch test.
Purpose: To check each item, such as
a motor or clutch, for proper operation.
Section
2.4.1.5.2
Section 6.3.2.4
20 Color
registration
adjustment
function
Executes the color registration
adjustment test.
Section
2.4.1.5.3
Section 6.3.2.6
Item Adjustment
Section in
Maintenance
Utility Operation
manual
Operation from
operator panel
(section in this
maintenance manual)
21 Density
adjustment
test
Executes the density adjustment test. Section
2.4.1.5.4
Section 6.3.2.7
22 Automatic
Density
Adjustment
Control
Parame-
ters Setting
(DENSITY
ADJUST
PAR-SET)
Sets the auto density setting control
parameter.
Never use
this option.
Section 6.3.2.7
23 Counter Checks the consumable, continuous
consumable and waste toner counter
values.
Section
2.4.1.5.6
Section 6.3.2.8
24 Local
Parame-
ters
Setting/
Information
Switches between the Factory and
Shipping modes and checks the status
of the fuse.
Section
2.4.1.5.7
Section 6.3.2.10
25 Engine
Parame-
ters Setting
Makes an engine parameter setting. Section
2.4.1.5.8
Section 6.3.2.11
26 Translate
Parame-
ters Setting
Makes a print media transfer parameter
setting.
Section
2.4.1.5.9
Section 6.3.2.11
27 PU
diagnosis
log save
function
Stores self-diagnosis log files of printer
paper running system.
Section
2.4.1.5.10
Unavailable
Note! Do not operate or set options marked with ‘Never use this option’, or a
malfunction is potentially caused.