Oki B721

Oki Data CONFIDENTIAL
45487001TH Rev.1
6-9 /
6. Troubleshooting procedure
LCD Status Message
( represents a blank line.)
READY
indicator
ATTEN-
TION
indicator
Beep Details
Remedial
measure
Image Drum Life,
%PAGES% Pages
Left
Varies On –
Notifies the prolonged period of the
Print Cartridge life, after reached
its limitation, by the operator's
requirement.
%PAGES%
1~100
Replace
the image
drum with a
new image
drum.
Print Cartridge Life,
%PAGES% Pages
Left
Varies On –
Notifies the prolonged period of the
Print Cartridge life, after reached
its limitation, by the operator's
requirement.
%PAGES%
1~100
Replace
the
Print
Cartridge
with a
new
Print
Cartridge
.
Image Drum Life,
Print Quality Not
Guaranteed
Varies On –
Notifies the last prolonged period of
the image drum life.
This appears after the hidden
operation was done at the life
limitation.
Replace
the image
drum with a
new image
drum.
Print Cartridge Life,
Print Quality Not
Guaranteed
Varies On – Notifies the last prolonged period of
the Print Cartridge life.
This appears after the hidden
operation was done at the life
limitation.
Replace
the
Print
Cartridge
with a
new
Print
Cartridge
.
%TRAY% Empty
Varies On – The tray is empty. Treated as
Warning until printing to the empty
tray is designated.
%TRAY%
Tray 1
Tray 2
Tray 3
Tray 4
MPTray
Tray2(LCF)
*When LCF is installed at
tray2's position.
Tray3(LCF)
*When LCF is installed at
tray3's position.
Load paper
in the
indicated
tray.
LCD Status Message
( represents a blank line.)
READY
indicator
ATTEN-
TION
indicator
Beep Details
Remedial
measure
%TRAY% Lift Up
Error
Varies On –
Lift Up Error has occurred to Tray.
That tray is treated "Paper Empty" as
a result, and printing from that tray
becomes disabled.
%TRAY%
Tray2(LCF)
*When LCF is installed at tray2's
position.
Tray3(LCF)
*When LCF is installed at tray3's
position.
Remove
the tray
and put it
back in the
printer.
%TRAY%
Overfilled
Varies On –
Displays that there is too much paper
in Tray. This is a warning; thus,
printing will not stop.
%TRAY%
Tray2(LCF)
*When LCF is installed at tray2's
position.
Tray3(LCF)
*When LCF is installed at tray3's
position.
Remove
excess
paper from
the tray.
File System is Full
Varies On –
Disk-full is occurring. Because this is a
temporary warning, it remains until the
end of the job and disappears.
Explain the
user that
no remedial
measure is
required.
File System is
Write Protected
Varies On –
An attempt to write in a read-only file
was done. Because this is a temporary
warning, it remains until the end of the
job and disappears.
Explain the
user that
no remedial
measure is
required.
File Erasing
Varies On –
Indicates that a secret file is being
erased.
–
Deleting Encrypted
Job
Varies On –
It indicares the deletion of encrypted
authentication print job and saving of
deletion request of file.
–
Erased Data Full
Varies On –
Indicates that a secret file waiting to
be erased is full.
–