Oki B721

Oki Data CONFIDENTIAL
45487001TH Rev.1
6-13 /
6. Troubleshooting procedure
LCD Status
Message
READY
indicator
ATTEN-
TION
indicator
Beep Details
Error
code
Change Paper in
%TRAY%
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE
Button
Please see HELP
for details
Off Blink On
The media type in the tray and the
print data do not match. Load proper
paper in the tray (It takes a while until
the status disappears after you have
closed the tray and the lever lifted.)
(%T R AY % :TrayName, %MEDIA_
SIZE%:PaperName, %MEDIA_
TYPE%:MediaTypeName)
Error 661 : Tray1
Error 662 : Tray2
Error 663 : Tray3
Error 664 : Tray4
Error 662 : Tray2(LCF)
*When LCF is installed at tray2's position.
Error 663 : Tray3(LCF)
*When LCF is installed at tray3's position.
Paper size displays in Custom mode:
"<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
The unit of paper size in Custom: The
unit specified for MPTray (menu setting)
is used if no unit is specified by the driver.
When the driver specifies a unit, the unit
is used for display.
As a user pressed ONLINE key, the
printer could ignore this error at the just
printing job.
Error
661
662
663
664
LCD Status
Message
READY
indicator
ATTEN-
TION
indicator
Beep Details
Error
code
Change Paper in
MPTray
%MEDIA_SIZE%
%MEDIA_TYPE%
Press ONLINE
Button
Please see HELP
for details
Off Blink On
The media type in the tray and the print
data do not match. Load proper paper in
the tray (It takes a while until the status
disappears after you have closed the
tray and the lever lifted.) (%MEDIA_
SIZE%:PaperName, %MEDIA_
TYPE%:MediaTypeName)
Error 660 : MPTray
Paper size displays in Custom mode:
"<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
The unit of paper size in Custom: The
unit specified for MPTray (menu setting)
is used if no unit is specified by the driver.
When the driver specifies a unit, the unit
is used for display.
A user needs to press ONLINE key after
changing the paper.
Error
660
Change Paper in
%TRAY%
%MEDIA_SIZE%
%MEDIA_TYPE%
Please see HELP
for details
Off Blink On The size of paper or media type in the
tray does not match the print data.
Load paper in tray. (It takes a while
until the status disappears after you
have closed the tray and the lever
lifted.)
Error 461 : Tray1
Error 462 : Tray2
Error 463 : Tray3
Error 464 : Tray4
Error 462 : Tray2(LCF)
*When LCF is installed at tray2's position.
Error 463 : Tray3(LCF)
*When LCF is installed at tray3's position
The paper size displaying form of the
custom mode is the same as above.
Paper size displays in Custom mode:
"<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
As a user pressed ONLINE key, the
printer could ignore this error at the
just printing job.
If Media_Size has both portrait and
landscape, %MEDIA_SIZE% displays
icon which indicate paper orientation
after Paper Size.
Error
461
462
463
464