Oki B721

Oki Data CONFIDENTIAL
45487001TH Rev.1
6-16 /
6. Troubleshooting procedure
LCD Status
Message
READY
indicator
ATTEN-
TION
indicator
Beep Details
Error
code
Install Paper
%TRAY%
%MEDIA_SIZE%
Please see HELP
for details
Off Blink On Printing request is issued to an empty
tray.
Load paper.
(It takes a while until the status
disappears after you have closed the
tray and the lever lifted.)
Error 491 : Tray1
Error 492 : Tray2
Error 493 : Tray3
Error 494 : Tray4
Error 492 : Tray2(LCF)
*When LCF is installed at tray2's position.
Error 493 : Tray3(LCF)
*When LCF is installed at tray3's position.
The paper size displaying form of the
custom mode is the same as above.
Error
491
492
493
494
Install Paper
Cassette
%TRAY%
Please see HELP
for details
Off Blink On Indicates removal of the paper
cassette of Tray 1 that is a paper path
in attempting to print from Tray 2, 3, 4,
or LCF.
Error 440 : Tray1
Error 441 : Tray2
Error 442 : Tray3
Error
440
441
442
Reset Tray
%TRAY%
Please see HELP
for details
Off Blink On Print request was made to Tray, to which Tray
Lift Up Error has occurred.
Lift Up Retry will take place when the tray is
removed and put back in.
%TRAY%
Error 521 : Tray2(LCF)
*When LCF is installed at tray2's position.
Error 522 : Tray3(LCF)
*When LCF is installed at tray3's position.
Error
521
522
LCD Status
Message
READY
indicator
ATTEN-
TION
indicator
Beep Details
Error
code
Remove Excess
Paper
%TRAY%
Please see HELP
for details
Off Blink On Print request was made to Tray, which
has been detected to have too much
paper.
This status will be cleared when
excess paper is removed from that
tray and the tray is put back in.
%TRAY%
Error 531 : Tray2(LCF)
*When LCF is installed at tray2's position.
Error 532 : Tray3(LCF)
*When LCF is installed at tray3's position.
Error
531
532
Install Paper
Cassette
%TRAY%
Please see HELP
for details
Off Blink On Indicates that paper feed is
unavailable in attempting to print from
Tray 1 due to removal of the paper
cassette of Tray 1. (Occurs only when
Tray 2 has been installed.)
%TRAY%
Error 430 : Tray1
Error 431 : Tray2
Error 432 : Tray3
Error 433 : Tray4
Error 431 : Tray2(LCF)
*When LCF is installed at tray2's position.
Error 432 : Tray3(LCF)
*When LCF is installed at tray3's position.
Error
430
431
432
433
Install Toner
For Maximum
Performance
Always Use
%COMPANY_
NAME% Original
– – – This should be appeared after the
toner empty error messages when
OKIORIGINALCONSUMABLEDISPLAY is
ON to display this.
–
Install New Image
Drum
For Maximum
Performance
Always Use
%COMPANY_
NAME% Original
– – – This should be appeared after the
drum life error messages when
OKIORIGINALCONSUMABLEDISPLAY is
ON to display this.
–