Oki Data CONFIDENTIAL
45487001TH Rev.1
4-11 /
4. Maintenance menus
Item Settings Functions
Admin Setup PS
Setup
USB
Protocol
ASCII
RAW
Speciļ¬es PS communication protocol
mode of data from USB.
(In RAW mode, Ctrl-T is invalid.)
PDF Paper
Size
Current Tray Size
Size in PDF ļ¬le
Scaling Size
Paper size Select of PDF Direct Print
Current Tray Size : It selects the current
tray, and it lets ļ¬t paper size of the tray.
Size in PDF ļ¬le : It refers to the paper size
in a PDF ļ¬le and does an automatic tray
selection.
Scaling Size : It refers to the paper size
in a PDF ļ¬le and does an automatic tray
selection. If the paper with the same size
with PDF ļ¬le, print on it. If ther is not,
request paper on current tray, and scaling
print.
PDF
Scaling
Size
1%
~
99%
Speciļ¬es scaling size by percent when
PDF Paper Size is set to Scaling Size.
[Conditions for display]
This menu only is displayed when PDF
Paper Size is set to Scaling Size.
PCL
Setup
Font
Source
Resident
Downloaded
Speciļ¬es the location of PCL default font.
Downloaded: Displayed when soft font
is downloaded to RAM as permanent
designation.
Font
Number
0
S1
Sets the PCL font number.
The valid range of this variable changes
depending on the FONT SOURCE setting
at the time. If the default font is set for
FONT SOURCE, the number starts at
0. If it is not, the number starts at 1. The
maximum value is equal to the number of
fonts installed in FONT SOURCE.
S1 is displayed only when soft font is
downloaded with permanent designation.
Font Pitch
0.44CPI
~
10.00CPI
~
99.99CPI
Width of the PCL default font. The unit
is character/inch (Default font is ļ¬xed-
pitch, scalable font.) The value of pitch
is displayed down to the second decimal
place (in the unit of 0.01 CPI).
Displayed only when the font selected in
Font No. is ļ¬xed-spacing, scalable font.
Item Settings Functions
Admin Setup PCL
Setup
Font
Height
4.00 point
~
12.00 point
~
999.75 point
Height of the PCL default font. The value
is displayed down to the second decimal
place (in the unit of 0.25 POINT.)
Displayed only when the font selected in
Font No. is proportional-spacing, scalable
font.
Symbol
Set
PC-8
PC-8 Dan/Nor
PC-8 Grk
PC-8 TK
PC-775
PC-850
PC-851 Grk
PC-852
PC-855
PC-857 TK
PC-858
PC-862 Heb
PC-864 L/A
PC-866
PC-866 Ukr
PC-869
PC-1004
Pi Font
Plska Mazvia
PS Math
PS Text
Roman-8
Roman-9
Roman Ext
Serbo Croat1
Serbo Croat2
Spanish
Ukrainian
VN Int'l
VN Math
VN US
Win 3.0
Win 3.1 Arb
Win 3.1 L/G
Win 3.1 Blt
Win 3.1 Cyr
Win 3.1 Grk
Sets a symbol set of PCL.
Modiļ¬es a symbol set to the default
symbol set of the font when the selected
font of FONT No. can not use the selected
symbol set.
To Next Page
Loading...
Need help?
General
