42615101TH Rev.8 168 /
Oki Data CONFIDENTIAL
5.6 Settings by Hand for Print Density Adjustment
Auto Density Adjustment mode is set to [AUTO] at printer shipment, however, if it is set to [Manual],
misalignment of printing may occur during printer operation. In such cases, the density is to be
adjusted.
Notes!
Print density adjustment is to be performed with printers at rest. Do not adjust print
density during printer warming-up.
1. Press the MENU+ or MENU- key several times to show [COLOR MENU], and press the ENTER
key.
2. Press the MENU+ or MENU- key to display [DENSITY ADJUSTMENT/ RESET].
3. Press the ENTER key.
Auto print density adjustment starts.
To Next Page
Loading...
Need help?
General
