- 128 -
5. Operating Management/ Specifications
IBM PPR Setup
EPSON FX Setup
Private Print Setup
Item Factory
default
setting
Description
Character Pitch 10 CPI Specifies character pitches in IBM PPR emulation.
Font Condense 12CPI to 20CPI Specifies 12CPI pitches for Condense Mode.
Character Set SET-2 Specifies a character set.
Symbol Set IBM-437 Specifies a symbol set.
Letter O Style Disable Specifies the style that replaces 9BH with letter o and 9DH with
a zero.
Zero Character Normal Sets the zero to be slashed or unslashed.
Line Pitch 6 LPI Specifies the line spacing.
White Page Skip OFF Selects whether to print blank pages.
CR Function CR Selects a carriage return from [CR] or [CR+LF].
LF Function LF Selects a line feed from [LF] or [LF+CR].
Line Length 80 Column Specifies the number of characters per line.
Form Length 11.7 inch or 11
inch
Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top edge of paper.
Left Margin 0.0 inch Specifies the distance from the left edge of paper so that the
print starting point shifts to the right horizontally.
Fit To Letter Disable or
Enable
Sets the printing mode that can fit paper to the printable area
equivalent to 11 inches (66 lines).
Text Height Same Sets the height of a character.
SAME: The height stays the same regardless of CPI.
DIFF: The height varies according to CPI.
Item Factory
default
setting
Description
Character Pitch 10 CPI Specifies character pitches.
Character Set SET-2 Specifies a character set.
Symbol Set IBM-437 Specifies a symbol set.
Letter O Style Disable Specifies the style that replaces 9BH with letter o and 9DH with
a zero.
Zero Character Normal Sets the zero to be slashed or unslashed.
Line Pitch 6 LPI Specifies the line spacing.
White Page Skip OFF Selects whether to print blank pages.
CR Function CR Select a carriage return from [CR] or [CR+LF].
Line Length 80 Column Specifies the number of characters per line.
Form Length 11.7 inch or 11
inch
Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top edge of paper.
Left Margin 0.0 inch Specifies the distance from the left edge of paper so that the
print starting point shifts to the right horizontally.
Fit To Letter Disable or
Enable
Sets the printing mode that can fit paper to the printable area
equivalent to 11 inches (66 lines).
Text Height Same Sets the height of a character.
SAME: The height stays the same regardless of CPI.
DIFF: The height varies according to CPI.
Item Factory
default
setting
Description
Verify job option Disable Set whether to verify a job before printing.
If enabled, the machine verifies that the job is not altered before
starting printing. The security is enhanced, however it will take
longer to start printing.
Erase job option No overwrite Set how to delete a job.
You can overwrite deleted data so that it will not be restored.
If enabled, it will take longer to delete.
Available value: No overwrite/Zero out once/Multiple random
overwrites
Keep job for 2 hours Set the storage period of jobs.
If the set period elapses after jobs are stored, the jobs will be
automatically deleted.
Available value:
15 minutes/ 30 minutes/ 1 hour/ 2 hours/ 4 hours/ 8 hours/
12 hours/ 1 day/ 2 days/ 3 days/ 4 days/ 5 days/ 6 days/ 7 days
Job Limitation Disable Sets whether to save a restricted print job.
If [Private Print Only] is selected, print jobs other than private
print are not accepted.
Job Password Authentication OFF Sets whether to verify a job password when the access control is
enabled.
Job Auto Search ON Sets whether to search a job at the same time as unlocking the
panel lock when the access control is enabled.
Item Factory
default
setting
Description
To Next Page
Loading...
Need help?
General
