Oki C542dn Advanced Manual

- 127 -
5. Operating Management/ Specifications
PS Setup
XPS Setup
SIDM Setup
Font No. I0 Selects the font number to use.
Available range: I0 to I90 if [Resident] is set/C1 to C4 if
[Resident 2] is set.
Font Pitch 10.00 CPI Sets the width of the PCL default font.
Available range: 0.44 to 99.99 CPI. (0.01CPI increments)
It is displayed when the font that is selected by [Font No.] is the
outline font of fixed spacing.
Font Height 12.00 points Sets the height of the PCL default font.
Available range: 4.00 to 999.75 point. (0.25 point increments)
It is displayed when the font that is selected by [Font No.] is the
outline font of proportional spacing.
Symbol Set PC-8 Selects a PCL symbol set.
A4 Print Width 78 Column Sets the number of digits for automatic line feed on A4 paper.
White Page Skip OFF Selects whether to print blank pages.
CR Function CR Sets the machine operation when receiving CR code.
LF Function LF Sets the machine operation when receiving LF code.
Print Margin Normal Sets the nonprintable area of the page.
True Black OFF Selects whether to print black image data using mixed CMYK or
print using black toner only.
Pen Width Adjust ON Sets whether to emphasize thin lines so that the lines look
thicker.
Tray ID# Tray 1 1 Sets a value that specifies a tray with the PCL paper source
specification command.
Available range: 1 to 59
Tray 2
(Optional)
5
Tray 3
(Optional)
20
MP Tray 4
Item Factory
default
setting
Description
L1 Tray Type 1 Set the paper tray number for the Level 1 operator.
[Type 1]: The effective number for paper tray starts from 1.
[Type 2]: The effective number for paper tray starts from 0.
Network PS-Protocol RAW Specifies PS communication protocol mode of data from
Network.
USB PS-Protocol RAW Specifies PS communication protocol mode of data from USB.
Item Factory
default
setting
Description
PDF Paper Size Current Tray
Size
Set the paper size when printing with PDF Direct Print.
PDF Scaling Size 99% Sets reduction rate for PDF when [PDF Paper Size] is set to
[Scaling Size].
PDF Print Mode Quality priority Sets whether to give priority to the print quality or the print speed
when printing PDF.
Item Factory
default
setting
Description
DigitalSignature OFF Sets the DigitalSignature functions.
DiscardControl Auto Sets the DiscardControl function.
MC Mode ON Sets the MarkupComaptibility function.
Unzip Mode Speed Sets the XPS file decompression method.
White Page Skip OFF Selects whether to output blank pages in XPS.
Item Factory
default
setting
Description
SIDM Manual ID# 2 Set up Pn specified in MANUAL by MANUAL-1 ID No.FX/PPR
Emu in CSF control command (ESC EM Pn).
SIDM Manual2 ID# 3 Set up Pn specified in MANUAL by MANUAL-2 ID No.FX/PPR
Emu in CSF control command (ESC EM Pn).
SIDM MP Tray ID# 4 Set up Pn specified TRAYO (MP Tray) by MP Tray ID No.FX/
PPR Emu in CSF control command (ESC EM Pn).
SIDM Tray1 ID# 1 Set up Pn specified TRAY 1 by Tray 1 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
SIDM Tray2 ID#
(Optional)
5 Set up Pn specified TRAY 2 by Tray 2 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
SIDM Tray3 ID#
(Optional)
6 Set up Pn specified TRAY 3 by Tray 3 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
Item Factory
default
setting
Description

Oki C542dn Specifications

General

Brand	Oki
Model	C542dn
Category	Printer
Language	English