- 212 -
7. Utility Software
• Admin Setup
This function is displayed only if you log in as the administrator of the machine.
•Network
Item Description
General Network Settings Sets the general network settings.
Wireless(Infrastructure) Setting Sets the wireless(Infrastructure) settings.
Wireless(AP mode) Setting Sets wireless (AP mode) settings.
TCP/IP Sets TCP/IP information.
Easy Setup
NBT Sets NetBIOS over TCP information.
Mail Server Sets a mail server.
E-mail Receive Settings Sets an e-mail receive settings.
E-mail Setup (Web Page)
Alert Settings Sets the function that enables you to receive e-mail
alerts about events that have occurred on the machine.
E-mail Alert
SNMP Settings Sets SNMP.
Trap Sets SNMP Trap.
IPP Settings Sets the function that enables you to perform IPP print.
Authentication Sets authentication.
Google Cloud Print Sets Google Cloud Print information.
Windows Rally Sets Windows Rally information.
IEEE802.1X Sets EEE802.1X/EAP information.
Secure Protocol Server Sets secure protocol server information.
LDAP Sets LDAP information.
Proxy Sets Proxy information.
Security Protocol ON/OFF Stops a network protocol and network service that are
not used.
IP Filtering Restricts access by using IP addresses. Access from
outside your company is also supported. However, this
function requires sufficient knowledge about IP
addresses. Some settings may result in serious
problems that prevent you from accessing the machine
via a network.
MAC Address Filtering Restricts access by using MAC addresses. Access from
outside your company is also supported. However, this
function requires sufficient knowledge about MAC
addresses. Some settings may result in serious
problems that prevent you from accessing the machine
via a network.
SSL/TLS Encrypts communications between a computer (client)
and the machine.
IPSec Sets the encryption for communications between a
computer (client) and the machine, and settings to
prevent tampering.
WebPage Authentication
Method
Sets WebPage Authentication Method.
Item Description