- 213 -
7. Utility Software
• Print From USB Memory Setup
Set Print From USB Memory.
• Print Setup
• Management
You can set device settings.
• User Install
If [Auto] is selected for Time Setup, the time cannot be set from the operator panel.
• Job List
This function is displayed only if you log in as the administrator of the machine.
Maintenance Reset/Restore Restarts and resets a network. Even if you access the
Web page from the Web browser after restarting, the
Web page is not displayed until the restart is complete.
Resetting restores the IP address to its default status,
resulting in information you manually set being lost. In
such a case, the Web page cannot be displayed.
Network Scale Improves operation efficiency on a network. This setting
is very effective when a hub that has the spanning tree
function is used, or a computer and the machine are
connected one-on-one with a cross cable.
Item Description
Default Settings Sets default settings when printing from USB Memory.
Item Description
Print Menu Print Setup Sets the number of copies, resolution, and other settings.
When using the printer driver, the values that are set with
the printer driver are given priority over these settings.
Printer Adjust Sets manual timeout, jam recovery, and other print
adjustment settings.
Print Position Adjust Adjusts front X, front Y, back X and back Y positions.
Drum Cleaning Sets cleaning of an image drum.
Hex Dump Displays all the received print data in hex. To exit this
mode, restart the machine.
Color Menu Sets Color settings.
System Configuration Menu Sets operation modes, alarm release, and other machine
operation settings for each situation.
Emulation PCL Setup Sets PCL.
PS Setup Sets PS.
XPS Setup Sets XPS.
IBM PPR Setup Sets IBM PPR Setup.
EPSON FX Setup Sets EPSON FX Setup.
Private Print Setup Sets whether device will handle as a private print.
Item Description
Item Description
Local Interface USB Menu Sets USB.
Access Control Setup Sets user authentication and access control.
System Setup Sets display units and other settings.
Power Save Sets power save settings.
Memory Setup Sets the reception buffer size and resource save area.
Language Maintenance Setup Sets Language settings.
Font Setup Sets the output mode for fonts.
STOP Key Behavior Sets the behavior when the STOP key is pressed.
Setting to ON cancels the print job. Setting to OFF
disables the function.
Admin Password Sets an administrator password.
Reset Settings Initializes all the data that is set in "Management".
Print Statistics Enables/disables consumable counter.
Item Description
Power Setup Sets Auto power off and Power supply Return.
Time Setup Sets the time to the machine.
Business Phone Setup Sets up business phones.
Other Settings Sets other settings.