45376001TH Rev.1
111 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
5.1 Maintenance Utility
The adjustments described in table 5-1 should be made by using Maintenance Utility.
The following details the utility:
(1) Maintenance Utility Operating Manuals:
42678817FU02 Rev 4 or higher(English)
(2) Maintenance Utility program:
Applicable operating system File name Part number
Windows 2000/XP/Vista/7
(English)
MuWin.zip 42678817FW01 Rev.
1.41.0.1700
or higher
Table 5-1: Adjustment options in Maintenance Utility
Option Adjustment
Section in
Maintenance
Utility
Operating
Manual
Operation from
operator panel
(section in this
maintenance
manual)
1 Board
replacement
Copies information in the EEPROM in
the PU block, and the settings in the
EEPROM in the CU block.
Purpose: To copy the above data onto
a CU/PU board with which to replace
the CU/PU board for a maintenance
purpose.
2.4.1.1.1 Unavailable
2 Serial
number
setting
Rewrites the serial number recorded in
the PU block and selects and rewrites
the printer serial number recorded in
the CU block and rewrites the output
mode recorded in it.
Purpose: To configure a maintenance
replacement PU/CU board onto which
the CU/PU board information cannot
be copied with the board replacement
function (e.g. due to an interface error).
2.4.1.1.2.3 Unavailable
Option Adjustment
Section in
Maintenance
Utility
Operating
Manual
Operation from
operator panel
(section in this
maintenance
manual)
3 Factory/
Shipping
mode
Switches between the Factory and
Shipping modes.
Purpose: To configure a maintenance
replacement PU board onto which the
CU/PU board information cannot be
copied with the board replacement
function (e.g. due to an interface error).
The maintenance board is put to the
Factory mode usually by default and,
by using this function, must be set to
the Shipping mode.
2.4.1.1.2.4 5.2.1.10
4 Board
option setup
information
Checks serial number information and
the Factory/Shipping mode.
2.4.1.1.5 Unavailable
5 Send to file Send the specify file. 2.4.1.2.1 Unavailable
Note: Do not operate or set options added with ‘Never use this option,’ or a
malfunction is potentially caused.
To Next Page
Loading...
Need help?
General
