45376001TH Rev.1
144 /
Oki Data CONFIDENTIAL
6. Periodic Maintenance
6.5 How to clean the rollers in the ADF
If the document feeding rollers in the ADF are contaminated with ink, toner particles or
paper dust, documents and outputs get dirty and a paper jam may occur. To prevent this, it is
recommended to clean the rollers once a month.
(1) Thrn off the power of MFP.
(2) Open the ADF cover.
(4) Wipe the document feeding rollers with a soft cloth lightly moistened with water.
Wipe the whole surface of the roller while turning it with your hand.
Note! If the rollers get too dirty, wipe them with a soft cloth lightly moistened with
neutral detergent, and then wipe it again with a soft cloth lightly moistened
with water.
(5) Close the Roller cover and ADF Cover.
Roller cover
Document feed roller
Feed roller
Surface of the Guide
(3) Open the Roller cover.
To Next Page
Loading...
