Loading Media4-16
" Do not load so much
paper that the top of the
stack is higher than the
maximum limit guide. Up
to 100 sheets (80 g/m
2
) of
plain paper can be
loaded into the tray at
one time.
5 Slide the media guides against
the edges of the paper.
6 Select [Copy]/[Paper]/[Tray 1]/[Change Tray Set]/[Paper Size] and [Paper
Type] in the configuration menu, and then select the setting for the size
and type of paper that are loaded. See also “[Paper]” on page 7-5.
Other Media
When loading media other than plain paper, set the media mode (Envelope,
Label, Letterhead, Thick 1, Thick 2, Glossy 1, Glossy 2, or Postcards) in the
driver for optimum print quality.
To Next Page
Loading...
