Olivetti d-COLORMF3000 - Copy Programs

Copy programs 8-3
Copy programs
Frequently used copy settings can be stored together as a program to easily
be recalled later.
Storing a copy program
" A maximum of 15 copy programs can be stored.
1 In the home screen, press [Copy].
2 Specify the copy settings.
3 Press the [Mode Memory] key.
The copy programs screen appear.
4 Press [Register].
5 Press [Name].
6 Type in the name of the copy program, and then press [OK].
" For details on entering text, refer to “Entering text” on page A-8.
7 Press [OK].
8 Press [Cancel].
The initial Copy mode screen appears again.
Deleting a copy program
1 In the home screen, press [Copy].
2 Press the [Mode Memory] key.
The copy programs screen appear.
3 Select the copy program to be deleted.
4 Press [Delete].
5 Press [Yes].
6 Press [OK].
7 Press [Cancel].
The initial Copy mode screen appears again.